• How do I correct check alignment in AP

  • Printing invoices from AP Inquiry

    We use Timberscan to import invoices in Sage for electronic copies. I sometimes have to print a stored invoice from the AP inquiry screen. It has always worked fine up until this week. Now when I print any invoice (no matter how old) the print out has…

  • Cheque printer changed. How to migrate the old printer configuration to new one?

    Dear team,

     We are recently change the printer for printing cheques to a latest printer .

    We were using HP Laser jet P1102 and we purchased a new Laser jet 107 W .

    But when we print the cheque , each time i have to edit the report according to values in…

  • Cheque printer changed

    Dear team,

     We are recently change the printer for cheques to a latest printer .

    We were using HP Laserjet P1102 and we purchased a new Laerjet 107 W .

    But when we print the cheque , each time i have to edit the report according to values in the cheque…

  • Create a Check

    Hello!

    Our accounting person is out and I need to print checks.  Anyone have a process for Sage 300 that uses Create a Check.  I don't have a log in for Create a Check, but it is one my desktop.  I was hoping it just needed a driver, but someone thinks…

  • Working from Home and Remote Printer

    I'm remoting in to our server to use Sage 300 CRE. I have a printer at home and I tried to install the printer on the server and redirect it so I can print checks.

    However Server 2008 OS is not compatible with my HP Printer.  I'm told the server OS…

  • Help Re-Print Paystubs

    My printer stopped in middle of my paystubs.  How do I reprint the Paystubs.... Please help

  • Printing

    Is there anyway to set default printers by module? For printing checks, I always want a different printer than posting. Also for bank recs, that printer is different than both checks and postings.

    I come from a Sage 300 background and at least for printing…

  • Paying a vendor by check

    I need to ask why when I am in the AP module and choose a vendor to pay and proceed to pay vendor when I choose print checks the system under the choice of “check” directs me to my c drive rather than my printer? I know it will do that for the report…

  • PR Check Alignment

    Is there a way to adjust the alignment of the employee name and address on the PR check form?  The name looks ok on the form, but it is too high to view in a window envelope.  My Direct Deposit Reports seem to be worse.  If I try to print everything a line…

  • Payroll checks printing two lines too low

    We recently switched to Windows 10 and it messed up all my print settings!  Payroll check settings - my checks are printing two lines too low.  My AP check settings were easy to adjust - you can actually open the window and see the lines and move or remove…

  • invoice format margins

    We are using the AIA Forms with CO invoice format. Everything is great until the CO's page. The bottom margin runs into the preprinted AIA form section and is unreadable..How can I change that?

  • OKI 490 and 590 printer issues

    One of my customers is running Sage 300 CRE, v15.1.  They have one each of OKI 490 and 590 printers that are attached via LPT1 on two separate workstations and then shared to network.  The only driver they have been able to use is the Epson LQ-2550 driver…

  • print spooling issues

    Print drivers were recently changed on our network printer.  Now print spooling of checks stops after 17 checks.  We have tried changing back to the original print driver and no success.

  • how do I create vendor address labels either in Sage CRE 15.1 or Word 2013 I am not a programmer

    Trying to create labels, it seems it should be way easier than the instructions I found in the knowledgebase, and the examples provided are for versions of word many years out of date.  What am I doing wrong?  Can I print labels right from Sage CRE 15.1…

  • New Printer

    I'm looking for printer advice...I currently have a single tray printer, and when I need to print AP or PR checks in Sage 300 CRE, I put them in the manual flip-out tray as needed. I thought it would be convenient to have multiple trays to store AP and…

  • Crystal Reports in Sage 300 14.1 - Print Setup - choosing 'current page' does not print actual current page if changed

    We have a large JC report that shows the different jobs on the left which correspond to different pages in the report.

    In the old Sage 300 13.1 you could choose print preview and choose "current page" and the print the current page selected.…

  • Create-A-Check vs Print Boss for MICR Checking Printing

    We use Sage 300 Construction & Real Estate and Quickbooks Pro with Piracle's Create-A-Check for MICR check printing.  We have just learned of Wellspring Software's Print Boss software that interfaces with Sage and Quickbooks.  Does anyone recommend…

  • To print electronic signature on laser checks

    Hi, We are switching to Laser checks from continuous dot matrix and are looking for a work-around solution to affix electronic signature onto the check face. Any suggestions...

  • Change Default Font for Checks

    Where is the Default font set for checks?  It is not defaulting to the global default font.

    Thanks,

    Mike

  • Timberline 300 CRE - How do you print a single Direct Deposit Notification when a few are mangled in the printer? Wish to avoid reprinting all the notifications

    Timberline 300 CRE - How do you print a single Direct Deposit Notification when a few are mangled in the printer? Wish to avoid reprinting all the notifications

  • Print Preview in Service Management will not display the Print dialog instead it immediately prints one copy 14.1

    Print Preview in Service Management will not display the Print dialog instead it immediately prints one copy.

    This started after I upgraded to 14.1, the user needs to print multiple copies for hundreds of agreements and would rather not have to use page…